Case Sealer | Model 30T

Tape top & bottom tape case sealer 5-50 cpm

Top & bottom tape sealer

Built for real world production, this tape sealer is designed to provide top reliability and efficiency in most challenging case sealing environments. With production-proven features that seal cases squarely and securely, this sealer has long set an industry standard for tape sealing productivity. Built into its heavy stainless steel frame are top quality components to virtually eliminate downtime for maintenance. It’s a case sealer that will fulfill your production needs today and in the future.

  • Rugged and reliable top & bottom case sealing
  • Rotary flap tucker for secure flap closing
  • Easy access tape roll for quick replacement
  • Designed for the most challenging case sealing requirements
  • Seal top flaps with tape at speeds to 50 cpm


  • Model 30 Video

    Note: The video shown is the Hot Melt Sealing Model 30 sealer. The Model 30T seals with tape.

  • 1

Features and Benefits

  • Built for production

    Built for production This tape case sealer is manufactured as a compact, integrated unit, which eliminates vibration that can lead to premature wear.

    The stainless steel frame is welded and bolted, and the upper operating mechanisms are secured to the frame by a solid rack and gear system.

    Drive shafts are solid 1-1/4" steel. The flight lugs are forged of cast aluminum for strength, mounted on wear-resistant 1-1/2" pitch flight chain.

    With a total machine weight of over 2,200 pounds, the Model 30T tape case sealer can handle the toughest production situations.This tape case sealer's sleek stainless steel frame won't rust and never needs painting. The clear, gull-wing doors are a standard feature, not special order. They are electrically interlocked to stop the sealer when opened, and allow total access to the machine.
  • No operator required

    No operator required Each case is automatically indexed into the case sealer from your conveyor. As the motor-driven flight lugs transfer the case through the sealer, the top inner flaps are folded by a powered flap tucker. Then, the outer flaps are folded and tape is applied. The case exits the machine sealed, square and ready for palletizing.
  • Easy tape roll replacement

    Easy tape roll replacement
This tape case sealer offers features that eliminate wasted tape and dramatically reduce lost production time for tape roll changes. Both the top and bottom tape rolls are exterior mounted to allow easy access.

    The "roll empty" sensor stops the sealer just as the end of the tape comes off the roll. The attendant simply replaces the roll, and attaches the new roll to the tail of the last roll.
  • Features for square cases

    Features for square cases A-B-C's exclusive flight lugs push each case at the corners, to square it during transfer. The cast aluminum flap folders are gradually contoured to fold the flaps at the score line then close them smoothly with no flap overlap.

    Even cases with undefined scores are folded squarely and securely.
  • Low maintenance

    Low maintenance
The rugged construction of the Model 30 tape case sealer is your guarantee that it will run longer with less wear or care. Yet this powerhouse case sealer has additional features to minimize your maintenance tasks.

    The main drive gear assembly is enclosed in a lubricating oil bath to eliminate gear wear. Sealed bearings and self-lubricated air cylinders never need maintenance. The automatic water eliminator prevents air valve damage caused by water in air lines.

    When routine maintenance or cleaning is necessary, the gull-wing doors swing out of the way to allow complete machine access.
  • Quick changeover

    Case size changeover is simple; position a new case at the infeed and use the manual crank adjusts to fit the new case height and width. In minutes, the tape case sealer is back in production.
  • 1

Model 30T Case Sealer Specifications


  • Case range: RSC cases
  • Electrical: Primary 230 or 440v, 60hz, 3ph
  • Air: .05 cu. ft. per cycle at 60 psi
  • Speed: 5 - 50 cases/minute
  • Tape roll diameter: up to 15-1/2” maximum on 3” diameter core

High Performance Features:

  • Automatic case feed
  • Automatic minor flap closing
  • Heavy-duty flight lug drive
  • Cast aluminum flap folders
  • Top quality taping heads: 2” width standard, 3” width also available
  • Gull-wing style high visibility doors
  • Low voltage control circuit transformer
  • Convenient power on-off button

Reduced Maintenance Features:

  • Heavy stainless steel frame
  • Exterior mounted tape rolls
  • Rapid-adjust cranks for case change
  • Maintenance-free sealed bearings
  • Main gear drive in sealed oil bath
  • Self-lubricating air cylinders
  • Automatic water eliminator

Optional features:

  • Repeatable position indicators on adjustment shafts

Download Floor Plan Drawings:

Click the link below to download the floorplan in .dwg format. If you need another format, please call 800-237-5975 and we will be happy to help.

- Model 30T Floor Plan