Model 30T Top & Bottom Tape Case Sealer

Model 30 top and bottom case tape sealer for tape sealing at speeds from 5 to 50 cases per minute

Here's a tape case sealer that can handle real-world production demands. It's built tough for high speed, three-shift-a-day case sealing operation. It seals cases squarely and securely, with A-B-C's exclusive case-squaring flight lugs and contoured flap folders. It's sensibly designed with quality components, built into the heavy stainless steel frame, to virtually eliminate downtime for maintenance. For a case sealer built to fulfill your production needs today and in the future, choose the Model 30 tape case sealer. With speeds from 5 – 50 cpm case sealing.
Download Brochure
Request a Quote Model 30T Applications Model 30T Applications
 

Features and Benefits

Model 30T Built for production

Built for production

This case sealer is manufactured as a compact, integrated unit, which eliminates vibration that can lead to premature wear. The stainless steel frame is welded and bolted, and the upper operating mechanisms are secured to the frame by a solid rack and gear system. Drive shafts are solid 1-1/4" steel. The flight lugs are forged of cast aluminum for strength, mounted on wear-resistant 1-1/2" pitch flight chain. With a total machine weight of over 2,200 pounds, the Model 30T case sealer can handle the toughest production situations.

This case sealer's sleek stainless steel frame won't rust and never needs painting. The clear, gull-wing doors are a standard feature, not special order. They are electrically interlocked to stop the sealer when opened, and allow total access to the machine.

Model 30T No operator required

No operator required

Each case is automatically indexed into the sealer from your conveyor. As the motor-driven flight lugs transfer the case through the sealer, the top inner flaps are folded by a powered flap tucker. Then, the outer flaps are folded and tape is applied. The case exits the machine sealed, square and ready for palletizing.

Model 30T Easy tape roll replacement

Easy tape roll replacement

This sealer offers features that eliminate wasted tape and dramatically reduce lost production time for tape roll changes. Both the top and bottom tape rolls are exterior mounted to allow easy access. The "roll empty" sensor stops the sealer just as the end of the tape comes off the roll. The attendant simply replaces the roll, and attaches the new roll to the tail of the last roll.

Model 30T Features for square casesFeatures for square cases

A-B-C's exclusive flight lugs push each case at the corners, to square it during transfer. The cast aluminum flap folders are gradually contoured to fold the flaps at the score line then close them smoothly with no flap overlap. Even cases with undefined scores are folded squarely and securely.

Model 30T Low maintenance

Low maintenance

The rugged construction of the Model 30 tape case sealer is your guarantee that it will run longer with less wear or care. Yet this powerhouse case sealer has additional features to minimize your maintenance tasks. The main drive gear assembly is enclosed in a lubricating oil bath to eliminate gear wear. Sealed bearings and self-lubricated air cylinders never need maintenance. The automatic water eliminator prevents air valve damage caused by water in air lines. When routine maintenance or cleaning is necessary, the gull-wing doors swing out of the way to allow complete machine access.

 

Quick changeover

Case size changeover is simple; position a new case at the infeed and use the manual crank adjusts to fit the new case height and width. In minutes, the case sealer is back in production.

Specifications

Model 30T top and bottom tape case sealer

Specifications:

  • Case range: RSC cases
  • Electrical: Primary 230 or 440v, 60hz, 3ph
  • Air: .05 cu. ft. per cycle at 60 psi
  • Speed: 5 - 50 cases/minute
  • Tape roll diameter: up to 15-1/2” maximum on 3” diameter core

High Performance Features:

  • Automatic case feed
  • Automatic minor flap closing
  • Heavy-duty flight lug drive
  • Cast aluminum flap folders
  • Top quality taping heads: 2” width standard, 3” width also available
  • Gull-wing style high visibility doors
  • Low voltage control circuit transformer
  • Convenient power on-off button

Reduced Maintenance Features:

  • Heavy stainless steel frame
  • Exterior mounted tape rolls
  • Rapid-adjust cranks for case change
  • Maintenance-free sealed bearings
  • Main gear drive in sealed oil bath
  • Self-lubricating air cylinders
  • Automatic water eliminator

Optional features:

  • Repeatable position indicators on adjustment shafts

Floor Plan Drawings

Click the link below to download the floorplan in .dwg format. If you need another format, please call 800-237-5975 and we will be happy to help.

- Model 30T Floor Plan

JUMP TO

Did You Know?

A–B–C’s palletizer tables are powered by a variable frequency motor that ensures soft starts and stops for smooth and reliable operation.