Model 49 Necks Down Decaser - Specifications
|
| |
Case Range |
Minimum |
Maximum |
| L |
9" |
26" |
| W |
8" |
15" |
| H |
5" |
13" |
|
|
|
|
- Case capacity: RSC cases, RSC-Tablock cases (Tablock cases require 180 degree full case inverter)
- Bottle capacity: Glass or plastic bottles (bottle height must exceed flap height-flap height equals 1/2 case width on RCS cases)
- Electrical: Primary 220, 440v, 60hz, 3ph
- Air: .05 cu. ft. per cycle at 60 psi
- Machine dimensions: 19’-10” L x 5’-2” W x 6’2” H
- Weight: 3,950 lbs., 4,020 lbs. with case turnover
|
| |
|
| |
|
Model 49 Necks Down Decaser - Standard Features |
High Performance Features:
- Solid channel steel frame construction
- Automatic case infeed- cases feed back-to-back
- Motor-driven dual vertical side belt case drive
- Impact-absorbing rubber bottle discharge belt
- Independent single filing chains that minimize bottle-to-bottle
contact
- Automatic case turnover uprights cases to customer’s powered
conveyor
Reduced Maintenance Features:
- Non-contact sensors monitor machine operation
- Sealed bearings throughout
- Quick-adjust turn handles for case changeover
Optional features:
- 180 degree full case inverter- to receive cases from overhead
conveyor
- Outer flap pre-breaker- relieves flap memory to facilitate case
packing
- 180 degree empty case turnover- uprights cases with four flap
control
|
