Built for production

This case sealer's stainless steel frame is welded and bolted for strength, and the upper operating mechanisms are secured to the frame by a solid rack and gear system. Drive shafts are solid 1-1/4" steel. The flight lugs are forged of cast aluminum, mounted on wear-resistant 1-1/2" pitch flight chain. A-B-C flight lug drive has been proven in thousands of case sealers as an extremely reliable and durable method of case transfer. With a total machine weight of over 2,200 pounds (not including compression) the Model 30 is built to handle the toughest production situations.

Features for square cases

A-B-C's exclusive flight lugs push each case at the corners, to square it during transfer. The cast aluminum flap folders are gradually contoured to fold the flaps at the score line then close them smoothly with no flap overlap. Even cases with undefined scores are folded squarely and securely.

The compression section is an independent unit, with a dual belt case transfer that is powered by a 1 hp motor to assure proper case transfer. The top belt is backed by spring loaded rollers which adjust to varying case heights for a uniform seal.

Low maintenance

The rugged construction of the Model 30 hot melt case sealer is your guarantee that it will run longer with less wear or care. Yet this powerhouse case sealer has additional features to minimize your maintenance tasks. The main drive gear assembly is enclosed in a lubricating oil bath to eliminate gear wear. Sealed bearings and self-lubricated air cylinders never need maintenance. The automatic water eliminator prevents air valve damage caused by water in air lines. When routine maintenance or cleaning is necessary, the gull-wing doors swing out of the way to allow complete machine access.

Easy changeover

Case size changeover is simple. First, position a new case at the infeed and use the manual crank adjusts to fit the new case height and width. Adjustments may be made from either side of the sealer. Next, set the new adhesive pattern at the electronic adhesive timer. In minutes, the case sealer is back in production.

Clean, functional design

This case sealer's sleek stainless steel frame won't rust and never needs painting. The clear, gull-wing doors are a standard feature, not special order. They are electrically interlocked to stop the sealer when opened, and allow total access to the machine.