| For high speed case erecting, choose the Model 450
case erector and sealer. This case former runs up to
50 cases per minute, providing square, well-sealed cases
to high speed lines. Packed inside its compact frame
is a workhorse machine, with a hefty 3 hp main drive
motor that powers cases through erecting and sealing.
With an easy-load case magazine, non-stop servo-controlled case sealing ram, computer-driven operation with touchscreen
controls, this case erector is the top choice for speed,
durability and reliability. |
 |
Features and Benefits |
|
 |
Large capacity, easy load case magazine |
The self-indexing auxiliary case magazine assures
a continuous case supply to the erector. As each
stack is used, another moves into position maximizing
time between refills. The low level design makes
it easy to refill without lifting cases.
|
|
 |
Designed for real world production |
This case erector is designed to accommodate
out-of-spec cases. The opening arms "over-open"
the major flaps to compensate for poorly slotted
cases, and the vacuum cups pull cases from above
and below
to ensure proper opening of warped cases. The
walking beam case drive squares each case during
transfer.
|
|
 |
A-B-C Intelligent Control ensures
precise operation |
Intelligent Control takes PLC logic one step
further to provide total control of operation.
Closed loop position feedback ensures precise timing
of each operating sequence through non-contact
sensors. The color display shows real-time operating
data and allows independent operation of all functions,
diagnostics, and changeover settings.
|
|
 |
Servo-powered sealing ram forms square cases
|
|
As each case enters the sealing station, the
servo motor-powered sealing ram smoothly and reliably
enters the case and compresses the flaps to ensure
a secure seal. The ram stroke is precisely controlled
by the servo motor, ensuring optimum precision
during high speed production runs.
|
|
|
