High speed, mechanical operation

The Model 335 case erector runs a realistic 35 cases per minute on a continuous motion, all-mechanical drive system. Each case blank is positively fed from the magazine by combination gripper/slide bar case transfer. A cam-operated opening arm and mechanical walking beam case transfer provide positive case handling and reliable operation throughout.

Space-saving, compact design

At only 19 linear feet including the extended auxiliary magazine and tablock module, this tablock case erector is 30% smaller than competitive machines.

Color touch screen gives you total control

The color display shows real-time operating data and allows independent operation of all functions, diagnostics, and changeover settings. Its simple, step-by-step sequences simplify set up and operation. Non-contact sensors monitor machine operation and ensure precise timing of each operating sequence.

Large capacity, easy load case magazine

The self-indexing auxiliary case magazine assures a continuous case supply to the erector. As each stack is used, another moves into position maximizing time between refills. The low level design makes it easy to refill without lifting cases.

Case feed designed for smooth operation

This case erector has self-adjusting, spring loaded grippers assure proper case feed from uneven stacks of warped or band-marked cases. Their unique "floating" design allows them to operate independently to grip each case firmly and provide a consistent and reliable case feed.

Simple tablock folder with bypass

This innovative method of tablock opening is the result of over 60 years of packaging machinery development. It's an original design that folds the flaps smoothly without stress on the tabs that can cause tearing or release. To run regular cases, the tablock module is set at bypass mode. It's that simple.

Reliable case erecting mechanism

A-B-C's cam-operated vacuum pullback case opener design has been proven in over ten years of in-plant production to be superior in running less-than-perfect corrugated. This method utilizes dual vacuum grippers- lower grippers provide solid compression to hold the case firmly while the upper grippers pull the case open.

Shock absorbing case forming ram

The case compression mandrel is equipped with shock absorbers to eliminate machine stress, to reduce maintenance and ensure long machine life.

Quick changeover

Adjustment for most case sizes may be completed without change parts, by using rapid adjust cranks and slides with locking handles. The adjustable ram requires tools for adjustment when this is required for a major case size change.