Case Range Minimum Maximum A 7" 22" B 2-7/8" 8" L 7" 22-3/4" W 5-3/4" 16" H 3" 15" E 12" 38"
K.D. length: 12" to 38" K.D. width: 8" to 29-1/4"	Case range: RSC and HSC cases Electrical: Primary 230 or 460v, 60hz, 3ph, NEMA 12 Air: 1.265 scfm per cycle at 80 psi Speed: Up to 35 cases/minute

High Performance Features:

• Heavy steel box frame construction- welded and bolted for strength
• All-mechanical main drive
• High capacity vacuum system
• Direct drive walking beam case transfer

Features for Reliable Operation:

• A-B-C’s Intelligent Control electronics provide total control of operation
• Low level case magazine holds 3 stacks of cases (approx. 300 kd’s) eliminating frequent refills
• Automatic case feed from top of stack by dual floating grippers to smoothly feed warped or band-marked cases
• Dual top and bottom vacuum grippers that over-open cases ensuring proper opening of cases with poor manufacturer’s joints
• Reliable walking beam case transfer

Reduced Maintenance Features:

• Non-contact sensors monitor machine operation
• Sealed bearings throughout
• Gull-wing style high visibility machine doors allow easy machine access
• Touchscreen control for machine jog, diagnostics, troubleshooting, changeover settings
• Back-up eye for surge control
• Elevated beacon fault light

A-B-C's Intelligent Control gives you more

Included in the base price of the machine, this package features:

Variable speed capability:

• 10 - 35 cases per minute (dependent on case sizes)
• Speed ramps up and down to suit line speed- all settings (including adhesive application) are automatically adjusted as speed changes
• Soft Stop - quits operation without dumping air
• Cycle stop - cycles out all cases before stop
• Main drive jog function
• Manual operation of all functions including glue test

Standard fault detection features:

• Downstream case backup
• Case magazine is empty or low
• No / low air pressure
• Guard door opened
• Case did not open properly
• Emergency stop activated
• Motor overload
• Photo eye is dirty or misaligned
• Encoder or coupling malfunction
• Individual sensor malfunction
• Minimum speed fault

Optional features:

• Magazine extensions for additional capacity
• CSSC case capability
• Repeatable position indicators on adjustment shafts
• 3" wide tape roll capability
• Grouped lubrication fittings